Hard Surface Cleaner 4oz

When you print with a toner printer, small amounts of static are built up within the printer. This static can bounce around some of your toner, especially the white toner. 

When you are using EZ Peel Paper or EZ Peel OneStep paper these extremely small toner particles are not big enough to be seen or even transfers on to your apparel. 

However, when you are working with a hard surface, especially a very smooth / glossy surface (like a mirror, glass or tile), these little toner particles can end up making your finished product look cloudy or hazy. 

This is the time to use this product, you simply use a paper towel or re-usable cloth with a little of this cleaner and it will wipe away the haze, and keep your transfer looking great. 

No, this product is for use AFTER you print and IF you see any residue or haze from your transfer. If you want to clean something before, it's easiest to just use isopropyl alcohol. 

This product can dissolve toner. However, it's mixed to not be extremely strong. It will easily wipe away the haze, but not your transfer. If you scrub hard enough, you can damage your transfer.

This cleaner is not meant to completely remove a transfer. If you need to remove a transfer, it will depend on the material. 

Glass / Mirror / Coated tile - These are generally very smooth and the transfer could be removed with a razor or plastic scraper. 

Wood - The easiest way to remove a transfer from wood would be to sand it off. 

Metal - This can vary greatly based on the type of metal. You may find yourself sanding or scraping or being unable to remove it. 

Mugs / Ceramic - This is going to be very hard to remove, if you can remove it at all. Mugs are designed to accept transfers. They will take in the transfer and hold on. You will probably have to replace the mug.